Nikon Connection Guide

Welcome to the Nikon camera connection guide! The process of connecting Cascable Transfer to your camera is usually very simple. This guide will walk you through the steps.

Contents

Before We Start

  1. Make sure your camera is supported by Cascable Transfer.
  2. Check that your camera’s firmware is up-to-date.
  3. Check that Cascable Transfer is up-to-date.

Connecting Cascable Transfer to Your WiFi-Enabled Camera

  1. Press the Menu button on your camera and navigate to Wi-Fi in the Setup menu.
  2. Select Network connection within the Wi-Fi menu and choose Enable.
  3. Select Network settings > View SSID to view the name of the WiFi network created by your camera.
  4. On your Mac, click the WiFi Wi-Fi indicator in the menu bar.
  5. Connect to the WiFi network that’s displayed on your camera’s screen.
  6. Launch Cascable Transfer on your Mac, it should automatically detect and connect to your camera.

Connecting Cascable Transfer to Your Camera Using a WU-1a/b WiFi Adapter

  1. Connect the WU-1a/b WiFi adapter to your camera and switch your camera on.
  2. On your Mac, click the WiFi Wi-Fi indicator in the menu bar and connect to the WiFi network being created by the WU-1a/b WiFi adapter.
  3. Launch Cascable Transfer on your Mac, it should automatically detect and connect to your camera.

Stuck?

If you’re struggling to get Cascable Transfer connected to your camera, check out our troubleshooting guide.