Nikon (Without SnapBridge) WiFi Connection Guide

Welcome to the Nikon WiFi connection guide! The process of connecting Cascable to your camera is usually very simple. This guide will walk you through the steps.

If you’re connecting your camera to Cascable via USB, you’ll instead want our Working with Wired Cameras guide.

Contents

Before We Start

  1. Make sure your camera is supported by Cascable.
  2. Check that your camera’s firmware is up-to-date.
  3. Check that Cascable is up-to-date.

Connecting Cascable to Your WiFi-Enabled Camera

  1. Press the Menu button on your camera and navigate to Wi-Fi in the Setup menu.
  2. Select Network connection within the Wi-Fi menu and choose Enable.
  3. Select Network settings > View SSID to view the name of the WiFi network created by your camera.
  4. Open Settings on your iOS device and navigate to Wi-Fi, connect to the WiFi network displayed on your camera.
  5. Launch Cascable on your iOS device, it should automatically detect and connect to your camera.

Connecting Cascable to Your Camera Using a WU-1a/b WiFi Adapter

  1. Connect the WU-1a/b WiFi adapter to your camera and switch your camera on.
  2. Open Settings on your iOS device and navigate to Wi-Fi, connect to the WiFi network being created by the WU-1a/b WiFi adapter.
  3. Launch Cascable on your iOS device, it should automatically detect and connect to your camera.

Stuck?

If you’re struggling to get Cascable connected to your camera, check out our troubleshooting guide.